AceNS Firmware V1.1 Announcement

 

AceNS Loader firmware v1.1AceNS Loader is the newest product from Ace3ds Team which is popular among switch users or switch hacking since it’s releasing. AceNS is with built-in 3 payloads-ATMOSPHERE, REINX and SX OS, supporting 6 payloads at most.

Here, Ace3ds team has announced AceNS Firmware V1.1, let’s take a quick look for Change logs as below:
1.Fixed the LED not off when injection fail problem.
2.Enhanced the stability of the injecting.

Firmware update instruction
1.Download the firmware file first.Unzip the firmware file.
2.Connect the AceNS Loader one to your Computer via the MicroUSB cable.
3.Copy the IAP folder to the root of USB drive.The file like this, USB DRIVE:\IAP\FIRMWARE.BIN.
4.Un-plug the MicroUSB cable.
5.Plug the MicroUSB again, the AceNS Loader will auto upgrade in 3 seconds, then the IAP folder in USB DRIVE should be auto deleted.

For AceNS Firmware V1.1 file download, please click here
For AceNS buying, please find here

 

SX OS v2.5 Beta Announcement

SX25

Team Xecuter are back with a fresh release of SX OS v2.5 Beta on on Dec 19, 2018. This new v2.5 beta release introduces two exciting new functionalities in sleepmode fixing and LAN-PLAY Support.

Let’s see what’s new in this release:

Fixed sleepmode in case of fuse mismatch
Sleep/standby mode would break when your emuNAND was on a different firmware version than your actual system NAND. This has been resolved now. So from now on you can run the latest and greatest firmware in emuNAND while at the same time keeping a lower firmware on your original system’s NAND. Nifty!

Added initial support for “Internet Local Wireless Play”
Many of you have been requesting for us to add support for “local wireless play” tunneling over the internet. We have integrated this functionality into SX OS for you. This currently requires you to use a bit of software, LAN-Play on a computer to facilitate the tunneling. This software can be downloaded from the LAN-Play website: www.LAN-PLAY.com. Check out their project, they are are doing an amazing job. To enable “Internet Local Wireless Play” simply head into the SX Menu and head over to the “options” page. There’s a toggle for enabling and disabling this functionality at will now.

For where to order SX OS, please find here.
For SX Pro buying, please check here.
For downloading, please click SX OS v2.5 BETA directly.

SX OS v2.4 Beta Announcement- Fully support for firmware 6.2.0

SX24After about two weeks’ efforts, Team Xecuter released SX OS v2.4 Beta which could fully support switch firmware 6.2.0 finally! Nintendo switch owners could feel free to update to switch firmware 6.2.0.

Now, lets have a look at what v2.4 brings to the table:

Support for firmware 6.2.0
Nintendo threw us a small curve-ball while we were in the middle of reworking some other parts of SX OS. That being said, SX OS is now fully compatible with the latest official firmware 6.2.0.

EmuNAND functionality reworked
Our initial release of EmuNAND used a storage mechanism that wasn’t what a lot of people were looking for. In our last release we decided to switch to using the microSD for EmuNAND storage, which in turn made some users that *did* like the old method of storing EmuNAND on the system NAND unhappy. We have reintroduced the support for EmuNAND-on-system-NAND as well as introduced a third storage method for your EmuNAND partition. You can now also opt to use a separate partition (as opposed to files in the regular (ex)FAT filesystem) as a storage backend for your EmuNAND. With three flavors of EmuNAND storage supported now, all of you can rejoice!
To recap, you now have three way of settings up EmuNAND now:
*EmuNAND on system NAND: repurpose part of your Switch internal storage for EmuNAND
*EmuNAND on microSD as partition: repartitions your microSD card with a separate EmuNAND partition
*EmuNAND on microSD as files: EmuNAND is stored on microSD as files instead of repartitioning
WARNING: Setting up your EmuNAND as partition on your microSD card will format your microSD card. After setup nothing but the boot.dat and license.dat will remain.

Homebrew R button interfering with ingame L+R buttons fixed
In the last release we introduced a method of invoking the homebrew launcher for any title by holding down the [R] button during application/game startup, this gives homebrew additional capabilities that it wouldn’t normally have. However, this seems to have caused some interference with some games, this has been fixed.

Embedded Homebrew Menu
Previously, you had to copy a `hbmenu.nro` file to your microSD card in order to use the homebrew launcher. This has been fully integrated into the SX OS boot.dat file now. Effectively this means all you need for setup is to copy our boot.dat file, simple!

For where to order SX OS, please find here.
For SX Pro buying, please check here.
For downloading, please click SX OS v2.4 BETA directly.

3DS firmware version 11.9.0-42 Released

11.9_002Nintendo announced the update for 3DS family system firmware to 11.9.0-42 on December 3rd 2018:
Further improvements to overall system stability and other minor adjustments have been made to enhance the user experience.

Applies to:  New Nintendo 3DS, New Nintendo 3DS XL, New Nintendo 2DS XL, Nintendo 3DS, Nintendo 3DS XL, Nintendo 2DS

As digimartz tested, the flashcarts digimartz selling for 3ds/ ds game playing could work well on 11.9.0-42: such as sky3ds+, sky3ds, r4i gold 3ds plus, r4i gold 3ds, Ace3ds plus, Ace3ds X, R4I SDHC 3DS, R4isdhc RTS Lite, R4isdhc Dual-Core, R4i-Gold EU, Gateway 3DS, R4i Gold 3DS DELUXE, R4i-Gold Pro…