How to play games with new relaesed EZ-FLASH OMEGA?

EZ-FLASH 1_副本

EZ-FLASH OMEGA is the newest flashcard announced by EZTEAM, it’s a powerful GBA flashcard.

EZTEAM did a lot in reducing cartridge size, all codes are rewritten from scratch to drive the kernel OS running faster and more stable. In property, the breakthrough for EZFLASH flashcard is saving data to microSD card directly after in-game save behavior. This specially solved the “losing precious save when battery dies” issue. Also, EZ-FLASH OMEGA has high game loading speed. As tested, it just takes 3 seconds to load up a 32MB game.

Below are the steps about how to use EZFLASH OMEGA:
1. Please prepare a FAT32 SD card. Also, you could use FAT/FAT16/ exFAT format SD card. If it is not, please format it into.

2.Please download the newest kernel and thumbnails pack for EZFLASH OMEGA here.
After unzipped the packs, please copy them into your SD card on the root folder place.

3.Please ensure there are “IMGS” and “EZKERNEL.BIN” files in your SD card.

4. Please download original games ROM and copy into the SD card, then you can insert your SD card to c, and put to your console to play the games you’ve downloaded.

EZFLASH OMEGA firmware updating:
It’s easy to update the kernel. Please insert the SD card to EZ-FLASH OMEGA, and put it to your console. To update it,  you can press “R” key and power up the console. The system will boot up after the update process done.
Meanwhile, you can see the kernel version on the upper right corner of System Setting.
Note: Please don’t turn off the power when updating.

EZFLASH OMEGA official website:
Please click here to get more information from EZFLASH OMEGA official website.

Good News! Brandnew EZ-FLASH OMEGA flashcard for GBA/GB/GBC/NES/NDS games released!

Good news! EZTEAM announced the EZ-FLASH OMEGA, a powerful GBA flashcard on 23th, March, 2018. As they stated, “It will be the last essential flashcart for every GBA fan and the end of GBA flashcart era”.

EZ-FLASH 1_副本EZ-FLASH 5_副本

EZ-FLASH OMEGA flashcard supports GBA/GB/GBC/NES games, you can just copy the games to your SD card to play. The two cases cartridge design, which is also a wonderful and convenient creation, makes EZFLASH easy to work among GBA/GBASP/NDS/NDSL/NDS LITE consoles.

EZTEAM did a lot in reducing cartridge size, all codes are rewritten from scratch to drive the kernel OS running faster and more stable. In property, they have a breakthrough in data saving,  EZ-FLASH OMEGA flashcard can save data to microSD card directly after in-game save behavior, this can effectivly avoid the data losing when battery dies. No doubt, this is such a good news for player.

Also, EZ-FLASH OMEGA has high game loading speed, data will be transfered to PSRAM by DMA instead GBA BUS. It just takes 3 seconds to load up a 32MB game as tested.
In patch aspect, EZ FLASH OMEGA team rewritten the patch engine, this could achieve quick patching. All official games can be patched without a blink.

The real time clock API, in stead of the official one, it can set up one game’s clock, you will never mess up other game’s clock.
EZTEAM team did a lot on improving user experience as well, i.e. simplify operations, popup menus, game thumbnails…

Please view EZ-FLASH OMEGA features in short below:
01. GBA game copy and play, no client needed;
02. Fast patch engine, instat game load speed, additional manual patch engine to support modified rom;
03. Hardware based direct save to SD card;
04. Cheat;
05. Save states;
06. Real time clock;
07. Sleep;
08. Hotkey customizable;
09. 256Mb PSRAM suppot all game instant load;
10. 512Mb Norflash, keep your favorite games;
11. GB/GBC/NES game copy and play;
12. System on chip level recovery mode, prevent upgrade dead;
13. Support FAT16/FAT32/EXFAT,128MB-128GB SD card;
14. Firmware and kernel both are upgradable.

How to use SKY3DS+ flashcard to play 3DS games?

For 3DS game players, it’s such a good news to know the exists of SKY3DS+ (or SKY3DSPLUS) flashcard. If you say SKY3DS is a breakthrough for playing 3DS games, then, we could say SKY3DS+  is a leap. It’s an updating version of SKY3DS,  which is easier in using or operating. Two orange buttons’ design makes it convenient to switch games back and forth. Believe it’s the best one for you to play 3DS games!

sky3ds+ new sticker

Here is the official website: http://www.sky3dsplus.net/sky+.html , main features are listed below:
* Included all the features of sky3DS;
* Plug & Play, easy to use, no more console setup;
* Game update directly by eshop patch download;
* System firmware update free, no console bricked worry;
* Switch game back and forth by two orange buttons;
* Compatible with other 3rd party homebrews;
* AP checks solved. Firmware updatable.

Below are steps for new comers to know how to use it:

1.Please use a blank or new FAT32 with 64kb format microSD card for the c. If your sd card is not, please format it into, which is the right version sd card for SKY3DS+.

2. Then, to make clear the SKY3DS+  version, please insert the sd card into SKY3DS+, then put it out. After that, please read the sd card in your PC, there is a setting.txt file in it. When you open the file, you can see the version in the first line which may not be the newest one as you compare the version in SKY3DS+ official website. If it is not, then you need to update the firmware version. It’s easy as well.

3. For firmware version updating, please go to SKY3DS+ official website, download the newest firmware version which is the first one in official download page.

4. After you download it, please unzip it, and cope the unzipped file (named firmware.bin) to your sd card. Then, please insert your sd card to SKY3DS+. To update the version, please do as the official website suggested: connect SKY3DS+ and PC via USD cable(the cable is in the SKY3DS+ package). The red led light (in SKY3DS+ ) shows for several seconds, then turn to green light and keep flashing for a while. Please pay attention, you need to wait the light turning off without any stopping to finish the updating.

5. Once you have the firmware version updated to the newest. You can delete the file (named firmware.bin) in the sd card.

6. Now, you can download some 3ds games, like Pokemon, Mario…from reliable sources to your sd card, and insert it to SKY3DS+; then put SKY3DS+ into your 3DS console(please note the game version should be same as your console version: EU version game for EU version console… ).

7. Finished! You can play the games you downloaded directly. Btw, you can also switch the games by pressing the orange buttons. Please have a try, you will find how wonderful for this two buttons’ design!

Hope the simple sharing can help some game players a lot in how to use SKY3DS+ flashcard to play 3DS games.